Wireless bridge recommendation?

AustinJerry
Member Posts: 108
✭✭✭




I have been using a device called a wireless bridge (a Linksys WET610N) in my Home theater equipment rack to provide network connectivity to various pieces of equipment. Just to make sure everyone understands what I mean by a wireless bridge, it is a device that connects wirelessly to my main router, and has four wired ports that provide wired connections to my equipment (not all of my equipment has wireless connectivity).
I am looking to replace the Linksys device because I cannot get it to connect to my router over the 5GHz network (don’t know why, but I have tried many times), and the 2.4GHz connection is slower than I would like. When I do a search for “wireless bridges”, I don’t see any devices that provide the functionality I am looking for. It is hard for me to believe that there isn’t a need for wireless bridge solutions, but I can’t seem to find any. Anyone have any suggestions for a device that can meet my requirements?
I am looking to replace the Linksys device because I cannot get it to connect to my router over the 5GHz network (don’t know why, but I have tried many times), and the 2.4GHz connection is slower than I would like. When I do a search for “wireless bridges”, I don’t see any devices that provide the functionality I am looking for. It is hard for me to believe that there isn’t a need for wireless bridge solutions, but I can’t seem to find any. Anyone have any suggestions for a device that can meet my requirements?
Fingbox owner from the beginning
6
Comments
-
AustinJerry said:I have been using a device called a wireless bridge (a Linksys WET610N) in my Home theater equipment rack to provide network connectivity to various pieces of equipment. Just to make sure everyone understands what I mean by a wireless bridge, it is a device that connects wirelessly to my main router, and has four wired ports that provide wired connections to my equipment (not all of my equipment has wireless connectivity).
I am looking to replace the Linksys device because I cannot get it to connect to my router over the 5GHz network (don’t know why, but I have tried many times), and the 2.4GHz connection is slower than I would like. When I do a search for “wireless bridges”, I don’t see any devices that provide the functionality I am looking for. It is hard for me to believe that there isn’t a need for wireless bridge solutions, but I can’t seem to find any. Anyone have any suggestions for a device that can meet my requirements?I used to use the same device until it died on me, of course, I had to figure out the same thing you are doing right now.In lieu of a Wireless Bridge, you may want to consider with adding a second router configured as an access point or take the dive to do Mesh networking.As an example, I use two ASUS routers that are capable of AI Mesh networking. The main router is on the ground floor, basically a finished basement if-you-will. The 'node' is literally two floors above the router. When they are connected the node acts not only as an access point, but also has the ports in the back for ethernet connections. You can even designate which connection takes priority, ethernet or wireless.With a second router connected as an AP, you 'may' have access to the ethernet ports, but it's unlikely. AI Mesh is a means that I believe you're looking for. Check it out and if you have any questions, please let me know."There's a fine line between audacity and idiocy."
-Warden Anastasia Luccio, Captain0 -
-
AustinJerry said:Yes, I am aware that a second router may provide the functionality I need, but I am hoping for a device with a smaller form factor. Thanks for sharing your solution.
"There's a fine line between audacity and idiocy."
-Warden Anastasia Luccio, Captain0 -
Hi @AustinJerry!
Maybe you will do better with powerline adapters, not to use their antenas but to use their LAN port included. Never tried my self, but with it and the smallest factor switch you can use, maybe you are in the road...
Also, I am pretty sure there are some AP with that functionality, small enough to replace your actual bridge.Keep looking up!0 -
-
AustinJerry said:I have tried powerline adapters, but was never able to get the throughput I want. I get close to 200Mbps with 5G wireless, and powerline was not able to get half that."There's a fine line between audacity and idiocy."
-Warden Anastasia Luccio, Captain0 -
I think since mesh networking become more popular (and more efficient, as does not consume wireless bandwith as repeater do), the demand for repeaters deminished and now these are hardly available. Personally I took a bollet and some time ago I spend some effort on upgrading my home network and putting additional cat6 wireing across house. Only then I connected additional Access Points in strategic locations to have good WiFi coverage too. So my whole home theater equipment is now hardwired... much better and stable experience.
Talking about powerline adapters; from your message it seems you were able to achieve ~100mbps, which should be more than enough for home theater applications? Even 4K HDR should be fine - Netflix recommends 25mbps. Did you run into any QoS problems with these adapters?1 -
Well, I am still using the Linksys WET610N, which achieves acceptable throughput using 2.4G wireless connectivity. However, I became frustrated that the Linksys would not connect using 5G, which it is supposed to support. My original inquiry was simply to see if alternative products were available that might allow me to connect using 5G, not that the Linksys 2.4G solution was not adequate for my equipment. And after my experiments with powerline adapters, I am unlikely ever to try that solution again.Fingbox owner from the beginning0
-
AustinJerry said:Well, I am still using the Linksys WET610N, which achieves acceptable throughput using 2.4G wireless connectivity. However, I became frustrated that the Linksys would not connect using 5G, which it is supposed to support. My original inquiry was simply to see if alternative products were available that might allow me to connect using 5G, not that the Linksys 2.4G solution was not adequate for my equipment. And after my experiments with powerline adapters, I am unlikely ever to try that solution again.
"There's a fine line between audacity and idiocy."
-Warden Anastasia Luccio, Captain0 -
-
AustinJerry said:Will a mesh network device have ports to provide wired network connections to equipment in my rack that doesn’t support wireless? If yes, can you suggest a specific device make/model?Yes, it even allows you, in the model that I use at home, to define which connection takes 'priority', Ethernet, Wifi, or Auto.I use the ASUS Ai Mesh devices at home, two (will add a third soon, because why not?) nearly covers my entire home inside and out. You can learn more about it here, and if you run into any issues I can assist you with that."There's a fine line between audacity and idiocy."
-Warden Anastasia Luccio, Captain1
Categories
- 5.8K All Categories
- 2.8K Ask about Connected Technology
- How To...
- 1.1K Devices & Security
- 1.6K Network Troubleshooting & Connectivity
- 114 General Discussion, Weird & Wonderful
- 45 Network Infrastructure
- 5.4K Ask about Fing
- 548 Fing Account Change Request
- 1.1K Fing Desktop
- 1.4K Fing App
- 1.7K Fingbox
- 534 Announcements, Beta Testing & Release Notes
- 160 Community Updates
- 29 Getting started
- 15 Community User Guides