All IP's not shown

Howdy
I have a network 10.51.3.0/255.255.255.0. Scanning the network with Mac or Ios version does not fully work. I have one wireless station connected to my main Wlan station as a client. Finging the network everything else shows but I cannot see the wireless client of any device connected to it(wired connections). There is no routing in my network, everything in same subnet.

Answers

  • ScoobyScooby Member Posts: 135
    100 Comments 25 Awesomes 25 Likes 5 Answers
    ✭✭✭
    Is the "wireless station" setup in "bridge" mode, or something else?
  • JuusoJuuso Member Posts: 4
    Photogenic First Comment
    Yes, it is in bridge mode.
  • ScoobyScooby Member Posts: 135
    100 Comments 25 Awesomes 25 Likes 5 Answers
    ✭✭✭
    Is it broadcasting the same SSID (as your WLAN station), or a different one?
  • JuusoJuuso Member Posts: 4
    Photogenic First Comment
    Different name is in use.
  • JuusoJuuso Member Posts: 4
    Photogenic First Comment
    Let me correct my last comment. This station I cannot see is configured as a client to my main WiFi AP and it is not transmitting any SSID itself. In this station I have wired connections to security cams and central heating system. Sometimes I can see some wired devices behind this client but most scans will not show them.
Sign In or Register to comment.